PIER | PIER Journals

2010-06-02

PIER

Vol. 104, 449-463, 2010

download: 325

TE Mode Propagation through Tapered Core Liquid Crystal Optical Fibers

Pankaj Choudhury and Wong Keng Soon

An analysis is presented of a three-layer tapered core liquid crystal optical fiber (TLCF) having the outermost clad section made of radially anisotropic liquid crystal. TE mode propagation through TLCF is demonstrated with maximum distribution of power in the liquid crystal section under the situation that the TLCF core and the inner clad regions are constructed of homogeneous and isotropic dielectric materials. Such a propagation feature is attributed to the radial anisotropy of the liquid crystal outer region, and attracts useful applications of TLCFs in evanescent field optical sensing and other coupling devices primarily used in integrated optics.

TE MODE PROPAGATION THROUGH TAPERED CORE LIQUID CRYSTAL OPTICAL FIBERS

2010-06-01

PIER

Vol. 104, 427-448, 2010

doi:10.2528/PIER10030102

download: 393

Time Reversal Experiments in the Microwave Range: Description of the Radar and Results

Lucio Bellomo , Sebastien Pioch , Marc Saillard and Eric Spano

We present a new RADAR system able to perform Phase Conjugation experiments over the ultrawideband [2-4] GHz. The system is equipped with a transmit/receive linear array made of eight antennas connected to a 2-port Vector Network Analyzer through eight independent couples of digitally-controlled RF attenuators and phase shifters. Thus, each channel can selectively transmit or receive and can as well attenuate and phase shift the RF signal. For each frequency, either the Phase Conjugation or the Decomposition of the Time Reversal Operator (DORT) is applied to the received signal and the appropriate amplitude and phase law is coded into the prototype; the focusing wave is then experimentally re-emitted by the array. The quality of the achieved backpropagation is evaluated both in frequency and time domain: in this sense we can speak of Time Reversal. The excellent agreement between measured and theoretical results validates the potential of our system.

TIME REVERSAL EXPERIMENTS IN THE MICROWAVE RANGE: DESCRIPTION OF THE RADAR AND RESULTS

2010-05-30

PIER

Vol. 104, 403-425, 2010

doi:10.2528/PIER10041504

download: 438

Properties of Electromagnetic Fields and Effective Permittivity Excited by Drifting Plasma Waves in Semiconductor-Insulator Interface Structure and Equivalent Transmission Line Technique for Multi-Layered Structure

Farahiyah Mustafa and Abdul Manaf Hashim

Strong interests are recently emerging for development of solid-state devices operating in the so-called "terahertz gap" region for possible application in radio astronomy, industry and defense. To fill the THz gap by using conventional electron approach or transit time devices seems to be very difficult due to the limitation that comes from the carrier transit time where extremely small feature sizes are required. One way to overcome this limitation is to employ the traveling wave type approach in semiconductors like classical traveling wave tubes (TWTs) where no transit time limitation is imposed. In this paper, the analysis method to analyze the properties of drifting plasma waves in semiconductor-insulator structure based on the transverse magnetic (TM) mode analysis is presented. Two waves components (quasi-lamellar wave and quasisolenoidal wave), electromagnetic fields (E_y, E_z and H_x) and ω-and k-dependent effective permittivity are derived where these parameters are the main parameters to explain the interaction between propagating electromagnetic waves and drifting carrier plasma waves in semiconductor. A method to determine the surface impedances in semiconductor-insulator multi-layered structure using equivalent transmission line representation method is also presented since multi-layered structure is also a promising structure for fabricating such a so-called plasma wave device.

PROPERTIES OF ELECTROMAGNETIC FIELDS AND EFFECTIVE PERMITTIVITY EXCITED BY DRIFTING PLASMA WAVES IN SEMICONDUCTOR-INSULATOR INTERFACE STRUCTURE AND EQUIVALENT TRANSMISSION LINE TECHNIQUE FOR MULTI-LAYERED STRUCTURE

2010-05-30

PIER

Vol. 104, 385-401, 2010

doi:10.2528/PIER10021004

download: 400

Electromagnetic Scattering by Conducting BOR Coated with Chiral Media Above a Lossy Half-Space

Da-Zhi Ding and Ru-Shan Chen

Electromagnetic scattering by conducting bodies of revolution (BOR) coated with homogeneous chiral media above a lossy half-space is formulated in terms of the Poggio-Miller-Chang-Harrington-Wu surface integral equation combined with combined field integral equation. A field decomposition scheme is utilized to split a chiral media into two equivalent homogeneous media. The spatial domain half-space Green's functions are obtained via the discrete complex image method. Due to the rotational symmetry property of BOR, the method of moment for BOR (BORMoM) is applied to the linear system solved by the multifrontal direct solver. Numerical results are presented to demonstrate the accuracy and efficiency of the proposed method.

ELECTROMAGNETIC SCATTERING BY CONDUCTING BOR COATED WITH CHIRAL MEDIA ABOVE A LOSSY HALF-SPACE

2010-05-28

PIER

Vol. 104, 333-384, 2010

doi:10.2528/PIER10020101

download: 561

Polarimetric Scattering Modeling and Information Retrieval of SAR Remote Sensing --- a Review of Fdu Work

Ya-Qiu Jin

Synthetic aperture radar (SAR) imagery technology is one of most important advances in space-borne microwave remote sensing during recent decades. Completely polarimetric scattering from complex terrain surfaces can be measured. Polarimetric SAR (POLSAR), and its relevant technologies, such as POL-interferometric SA (POLINSAR), bistatic SAR (POL-BISAR), high resolution (in m and dm resolution) SAR, inverse SAR (ISAR) etc., have been providing rich all-weather, all-time and high resolution data and images of active miscrowave remote sensing. Fully understanding and retrieving information from polarimetric scattering signatures of natural media and SAR images have become a key issue for the SAR remote sensing and its broad applications. Many researches on polarimetric scattering and SAR imagery technology have been carried out (e.g., [1-6]). This paper presents a review of the research works in Fudan University (FDU) during recent years on theoretical modeling of the terrain surface for polarimetric scattering simulation and Mueller matrix solution, mono-static and bistatic SAR image simulation, new parameters for unsupervised surface classification, DEM inversion, change detection from multi-temporal SAR images, and reconstructions of buildings from multi-aspect SAR images, etc. [7-46]. Some applications are briefly reported.

POLARIMETRIC SCATTERING MODELING AND INFORMATION RETRIEVAL OF SAR REMOTE SENSING --- A REVIEW OF FDU WORK

2010-05-28

PIER

Vol. 104, 313-331, 2010

doi:10.2528/PIER09111607

download: 250

Optimizing Nano-Optical Antenna for the Enhancement of Spontaneous Emission

Hui Gao , Kang Li , Fanmin Kong , Hao Xie and Jia Zhao

We study the characteristics of nano-optical antenna made of two gold nano-particles by three dimensional numerical calculations in visible and near infrared bands. To carry the computational burden and guarantee the precision and speed of a three dimensional FDTD calculation, adaptive mesh refinement technology is used. In this paper, we first highlight the concrete way of controlling the emitter position and orientation to fulfill the requirements of larger spontaneous emission enhancement. Then, we analyze the far field distribution and find that the far fied directivity is strongly influenced by surface plasmon polaritons (SPPs). Choosing the incident wavelength of 600 nm, we compute the decay rates and radiant efficiency as a function of antenna geometry limitations. Next, the particle aspect ratio is optimized, and we obtain that L/R = 4 is the best for our optical-antenna. Furthermore, we present a spectrum analysis. Around 5000 fold spontaneous emission enhancement is successfully achieved. Finally, we find a piecewise linearity relationship between the particle length and resonant wavelength.

OPTIMIZING NANO-OPTICAL ANTENNA FOR THE ENHANCEMENT OF SPONTANEOUS EMISSION

2010-05-27

PIER

Vol. 104, 297-311, 2010

doi:10.2528/PIER10050305

download: 315

Phase Detection with Sub-Nanometer Sensitivity Using Polarization Quadrature Encoding Method in Optical Coherence Tomography

Wen-Chuan Kuo , Chung-Yu Chuang , Ming-Yu Chou , Wen-Hung Huang and Sheng-Tsung Cheng

This paper presents a phase-resolved optical coherence tomography (OCT) system that uses the polarization quadrature encoding method in a two-channel Mach-Zehnder interferometer. OCT is a powerful optical signal acquisition method that can capture depth-resolved micrometer-resolution images. In our method, a complex signal is optically generated, and its real and imaginary components are encoded in the orthogonal polarization states of one sample beam; absolute phase information can then be acquired instantaneously. Neither phase modulation nor numerical Fourier or Hilbert transformation to extract phase information is required, thereby decreasing data acquisition rates and processing time. We conducted signal post-processing to select data from the instabilities of reference scanning delay lines; the measured phase sensitivity was as low as 0.23°, and the corresponding path-difference resolution was 265 pm. A localized surface profile measurement of a chromium-coated layer deposited on a commercial resolution target surface was conducted. The results confirmed that successful images can be obtained even with very small optical path differences using the proposed method.

PHASE DETECTION WITH SUB-NANOMETER SENSITIVITY USING POLARIZATION QUADRATURE ENCODING METHOD IN OPTICAL COHERENCE TOMOGRAPHY

2010-05-27

PIER

Vol. 104, 283-295, 2010

doi:10.2528/PIER10040602

download: 306

Element Position Perturbation for a Narrow Spot Beam with Applications to Satellite Communication Antennas

W. A. Bukhsh , Lars Jonsson and Patrik Persson

Design of array antennas for satellite applications is always a trade-off between physical constrains and pattern requirements. In this paper, the focus is on the design of a large array antenna for earth coverage applications using spot beams. The array antenna has a diameter of 1 m and consists of circular polarized horn antennas positioned in a non-uniform grid. By using a binary coded genetic algorithm (BCGA) the desired element positions and their excitations are optimized to fulfill the pattern requirements. In addition thinning has been used to study the possibility of maintaining good antenna performance when reducing the number of elements. The proposed antenna design has robust side lobe level, beam width and gain; all remain virtually unchanged under a change of operating frequency ±7% and under lobe steering over earth ±8.8^o.

ELEMENT POSITION PERTURBATION FOR A NARROW SPOT BEAM WITH APPLICATIONS TO SATELLITE COMMUNICATION ANTENNAS

2010-05-26

PIER

Vol. 104, 267-282, 2010

doi:10.2528/PIER09103001

download: 289

An Automatic Model Order Reduction of a UWB Antenna System

Zhan Zhang and Yee Hui Lee

This paper proposes an efficient and automatic means of achieving a reduced model of a transfer function for UWB antenna design. According to the formulation of a transfer function, we have derived two factors, which are critical in determining the radiation pattern and input impedance respectively. Their special formula allow us to establish a reduced model automatically using the Model Order Reduction (MOR) techniques of a second order system. The process is free of any human factors and suitable to any antenna systems, thus enabling a direct and efficient interface with the optimization process in the design of a UWB antenna system. In addition, the proposed way of establishing a transfer function of the whole antenna system has successfully cascaded the entire system into separate subsystems, thus offering deeper insights in analyzing a UWB antenna system.

AN AUTOMATIC MODEL ORDER REDUCTION OF A UWB ANTENNA SYSTEM

2010-05-26

PIER

Vol. 104, 253-266, 2010

doi:10.2528/PIER10022611

download: 2095

S Parameter Theory of Lossless Block Network

Chang-Hong Liang , Yan Shi and Tao Su

The energy conservation of lossless network reflects a series of novel symmetry in S parameter. This paper presents the generalized modulus symmetry, spurious reciprocity, constant characteristic phase and determinant of the lossless block network. The perfect matching condition of block load network [Γ_l] and the invariable lossless property of S parameter of generalized block network are developed. Application examples are given to illustrate the application and validity of the proposed theory.

S PARAMETER THEORY OF LOSSLESS BLOCK NETWORK

2010-05-26

PIER

Vol. 104, 239-251, 2010

doi:10.2528/PIER10032003

download: 441

Metallized Foams for Antenna Design: Application to Fractal-Shaped Sierpinski-Carpet Monopole

Jaume Anguera , Jean Daniel , Carmen Borja , Josep Mumbru , Carles Puente , Tiphaine Leduc , Khalid Sayegrih and Peter Van Roy

The technology of metallized foam offers a new approach to the design of wire-like, flat, and 3D antennas. Only the necessary metal skin depth (some microns in UHF band) is deposited over arbitrary shaped structures. Thanks to this technology new antenna designs have been possible offering low weight, possible shaping, and innovative architectures. To demonstrate these possibilities, a monopole inspired in the Sierpinski fractal carpet is built. The proposed design is suitable for a pico-cell base station antenna since the antenna operates at GSM850, GSM900, GSM1800, GSM1900, UMTS, Bluetooth/WLAN, WIMAX, and WIFI featuring omni-directional radiation pattern and an average total efficiency of 79%.

METALLIZED FOAMS FOR ANTENNA DESIGN: APPLICATION TO FRACTAL-SHAPED SIERPINSKI-CARPET MONOPOLE

2010-05-26

PIER

Vol. 104, 221-237, 2010

doi:10.2528/PIER10022001

download: 349

Multifractal Dimension and Its Geometrical Terrain Properties for Classification of Multi-Band Multi-Polarized SAR Image

Hse Tzia Teng , Hong-Tat Ewe and Sin Leng Tan

Multifractal dimensions D_q for real q are a more general parameter than the fractal dimension in describing geometrical properties. It has been shown that the four multifractal dimensions D_-1, D₀, D₁ and D₂ are able to extract different surface information of SAR images. In this paper, we investigate the dimension properties of multifractal dimensions. For land use classification where the textural information on the surface is important, it is necessary to look into the properties of multifractal dimensions with the geometrical properties of terrain. In order to extract the surface information from SAR images, the optimum number of multifractal dimensions to be used in the classification process is considered. To address the suitability of these parameters, these parameters are applied on a multi-band SAR image with regions of different textural information and the results are studied. The abilities of multifractal dimensions in extracting information for different land use classes are considered. In general, although multifractal dimensions provide additional information about the land use classes, there is no clear relation among the land use classes, image polarization and multifractal dimensions.

MULTIFRACTAL DIMENSION AND ITS GEOMETRICAL TERRAIN PROPERTIES FOR CLASSIFICATION OF MULTI-BAND MULTI-POLARIZED SAR IMAGE

2010-05-25

PIER

Vol. 104, 201-219, 2010

doi:10.2528/PIER10022311

download: 311

Multiple Order Dual-Band Active Ring Filters with Composite Right/Left-Handed Cells

Oscar Garcia-Perez , Luis Enrique Garcia-Munoz , Daniel Segovia-Vargas and Vicente Gonzalez-Posadas

In this paper, a novel dual-band active filter topology is presented. The non-linear phase response of a composite right/left-handed cell is used to achieve the desired dual-band performance. Additionally, the proposed structure based on coupled ring resonators yields a very compact solution in which high-order implementations can be easily obtained by cascading multiple rings. The theoretical principles of this type of filters are analyzed in detail. Finally, three prototypes based on first-, second- and third-order structures validate the feasibility of this type of filters. Good agreement between simulations and measurements has been achieved.

MULTIPLE ORDER DUAL-BAND ACTIVE RING FILTERS WITH COMPOSITE RIGHT/LEFT-HANDED CELLS

2010-05-24

PIER

Vol. 104, 183-199, 2010

doi:10.2528/PIER10032307

download: 341

Co-Frequency Interference Suppression Algorithm via Maximum Signal Minus Interference Level

Lingjiang Kong and Meifang Luo

Co-frequency interference problem is severe in shared-spectrum multistatic radar system, leading to detection problems in applications. In order to mitigate the co-frequency interferences, an adaptive pulse compression algorithm based on Maximum Signal Minus Interference Level criterion(MSMIL) is proposed in this paper, the main idea of which is to adaptively design an appropriate filter at each range cell, maximizing the result of signal power minus interference power, so that both range sidelobes and cross-correlation interference can be suppressed. Simulation results show that the algorithm outperforms the traditional multistatic adaptive pulse compression (MAPC) method in interference suppression. Compared with MAPC method, after one iteration step, the output SIR of the proposed algorithm is increased by about 10 dB. And after two iteration steps, it is increased by more than 40 dB. Moreover, it also outperforms the MAPC in convergence speed.

CO-FREQUENCY INTERFERENCE SUPPRESSION ALGORITHM VIA MAXIMUM SIGNAL MINUS INTERFERENCE LEVEL

2010-05-19

PIER

Vol. 104, 167-182, 2010

doi:10.2528/PIER10010803

download: 475

Electromagnetic Field Intensity Generated by Partial Discharge in High Voltage Insulating Materials

Alexe Bojovschi , Wayne Rowe and Alan Khoi Loon Wong

Partial dischagre is the precursor of insulators breakdown. In this work the propagation of electromagnetic radiation emitted from partial discharge in high voltage insulating materials is investigated. Three common dielectric materials used in power industry: polymer, epoxy resin and ceramics are studied. The results obtained are envisaged to support the development of appropriate sensors for partial discharge detection. The radiation pattern is dependent on a multitude of parameters. Among these, the intensity distribution of the source as well as the dielectric material and its geometry are the main parameters. Significant differences in the radiation spectra are obtained for insulators made of ceramic material compare to non-ceramic insulators.

ELECTROMAGNETIC FIELD INTENSITY GENERATED BY PARTIAL DISCHARGE IN HIGH VOLTAGE INSULATING MATERIALS

2010-05-17

PIER

Vol. 104, 145-166, 2010

doi:10.2528/PIER10041003

download: 693

Parametric Study of Pyramidal Microwave Absorber Using Rice Husk

Hassan Nornikman , Mohd Fareq Bin Abd Malek , Ping Jack Soh , Azremi Abdullah Al-Hadi , Fwen Hoon Wee and A. Hasnain

Agriculture waste has potential to be used as an alternative material for the microwave absorber used in the anechoic chamber. Compared to the current materials used, such as polystyrene and polyurethane, agricultural waste has low cost and is environmental friendly. In this paper, rice husks from paddy are used as the material in the pyramidal microwave absorber design, to operate effectively in the frequency range from 1 GHz to 20 GHz. Urea Formaldehyde (UF) and Phenol Formaldehyde (PF) are the resins investigated, and are used to make the rice husk particle board. There are four main stages in designing the rice husk pyramidal microwave absorber. They are fabricating the rice husk particle board, deriving the dielectric constant value of the resin-rice husk mixture particle board, simulating the rice husk pyramidal microwave absorber using CST Microwave Studio software, and analyzing the performance of the rice husk pyramidal microwave absorber. Various parameters that affect the performance of the pyramidal microwave absorber are investigated, such as the dielectric constant of the material used, mixed resin percentages, source-port distance and angles between the signal source and the surface of the pyramidal microwave absorber. The excellent reflection loss results show that the rice husks can be potentially used as the material in a microwave pyramidal absorber.

PARAMETRIC STUDY OF PYRAMIDAL MICROWAVE ABSORBER USING RICE HUSK

2010-05-17

PIER

Vol. 104, 125-143, 2010

doi:10.2528/PIER10040604

download: 289

Discussion on Validity of Hadamard Speckle Contrast Reduction in Coherent Imaging Systems

Feng Qi , Vahid Tavakol , Dominique Schreurs and Bart K. J. C. Nauwelaers

Hadamard speckle contrast reduction (SCR) is considered to be an effective approach to deal with speckle problems in coherent imaging systems. A Hadamard SCR system is divided into two sub-systems, which implement phase patterns projection and reflected waves imaging respectively. The performances of both sub-systems are discussed with numerical simulations and linked to certain parameters so as to give more insights of this approach. For generality, both optical and millimeter wave imaging systems are discussed. To distinguish from former literature based on Fourier optics, the simulation is implemented via wave optics, which is more physical and more accurate. Moreover, considering the fact that the Hadamard method originates from statistics, the effectiveness of Hadamard SCR is in the first place linked to the texture of the object's surface. Statistical optics is also adopted during qualitative analysis of the results. It is shown that the ratio between the dimension of a resolution cell and the granular size of the object's randomly rough surface is closely linked to the performance of Hadamard SCR. Differences in the roughness model in imaging cases of optical and millimeter waves are discussed, which would help to evaluate the validity of the Hadamard SCR approach in practice. The purpose of this paper is to clarify the misunderstandings of Hadamard SCR in previous literature and to give a guideline to apply this approach.

DISCUSSION ON VALIDITY OF HADAMARD SPECKLE CONTRAST REDUCTION IN COHERENT IMAGING SYSTEMS

2010-05-14

PIER

Vol. 104, 113-123, 2010

doi:10.2528/PIER10021202

download: 339

Subwavelength Microwave Guiding by Periodically Corrugated Strip Line

Jin-Jei Wu

A new type of microwave transmission line structure is proposed in order to reduce the crosstalk between transmission line circuits. In this structure, the edge of the metal strip line is periodically corrugated with subwavelength grooves of appropriate geometric parameters, and thus the transmission lines can support highly localized spoof surface plasmon polaritons (SPPs) at microwave frequencies. The theoretical simulation shows that the crosstalk between such a transmission line and a conventional strip line is very low at microwave frequencies, and this is further verified experimentally. This type of transmission line structures has great potential applications in high speed circuit systems.

SUBWAVELENGTH MICROWAVE GUIDING BY PERIODICALLY CORRUGATED STRIP LINE

2010-05-14

PIER

Vol. 104, 99-112, 2010

doi:10.2528/PIER10040704

download: 386

High Performance 1.8-18ghz 10-dB Low Temperature Co-Fired Ceramic Directional Coupler

Benito Lopez-Berrocal , Jose de-Oliva-Rubio , Enrique Marquez-Segura , Alvaro Moscoso-Martir , Inigo Molina-Fernandez and Peter Uhlig

This paper presents a six-section multi-layer asymmetric 10 dB directional coupler based on offset broadside coupled striplines, using Low Temperature Co-fired Ceramic (LTCC) technology, which operates over a decade bandwidth from 1.8 to 18 GHz. It features high performance transitions between the external signal layer and the buried signal layers, as well as a novel mixed first section to solve the limitations of the coupler access bends. A prototype was manufactured that exhibits a return loss of better than 15 dB, isolation of better than 23 dB and a high coupling accuracy of 10.3±0.6 dB over the 1.8-18 GHz band. This design outperforms previously reported results in terms of bandwidth and shows excellent potential for microwave measurement applications.

HIGH PERFORMANCE 1.8-18GHZ 10-DB LOW TEMPERATURE CO-FIRED CERAMIC DIRECTIONAL COUPLER

2010-05-13

PIER

Vol. 104, 85-97, 2010

doi:10.2528/PIER10033103

download: 270

A Novel Hybrid Aipo-MoM Technique for Jet Engine Modulation Analysis

Ho Lim and Noh-Hoon Myung

A novel hybrid adaptive iterative physical optics-method of moments (AIPO-MoM) technique is presented for the electromagnetic analysis of jet engine structures that are both electrically large and complex in both stationary and dynamic cases. In this technique, the AIPO method is used to analyze the smooth inlet region, and the MoM method is used to analyze the electrically complex compressor region, including blades and a hub. It is efficient and accurate by virtue of combining the respective merits of both methods. In the dynamic case, a concept for modified impedance equation is proposed to reduce computational load. Numerical results are presented and verified through comparison with Mode-FDTD and measured and commercial simulation packages results.

A NOVEL HYBRID AIPO-MOM TECHNIQUE FOR JET ENGINE MODULATION ANALYSIS

2010-05-12

PIER

Vol. 104, 69-83, 2010

doi:10.2528/PIER10031011

download: 497

Transfer Function and Compact Distributed RLC Models of Carbon Nanotube Bundle Interconnets and Their Applications

Jiang-Peng Cui and Wen-Yan Yin

According to the derived transfer function using different orders of approximation, stability and signal transmission analysis of a driven metallic single-walled carbon nanotube (SWCNT) bundle interconnect are performed. It is shown that as the length of SWCNT bundle interconnect increases, the poles will be closer to the imaginary axis, which causes the transmitted signal response tends to be more damping. Using the fourth-order approximation of the transfer function, the transmitted pulse waveform along the SWCNT bundle interconnect is captured accurately, with signal overshoot and time delay examined. Further, a complete physical model for the transient response of carbon nanotube bundle interconnect is derived, which can also accurately predict the transient response of carbon nanotube bundle interconnect including time delay and crosstalk.

TRANSFER FUNCTION AND COMPACT DISTRIBUTED RLC MODELS OF CARBON NANOTUBE BUNDLE INTERCONNETS AND THEIR APPLICATIONS

2010-05-09

PIER

Vol. 104, 49-67, 2010

doi:10.2528/PIER10041309

download: 262

Numerical Investigation of an Energetic Constraint for Inverse Scattering Problems

Davide Franceschini

Microwave inverse scattering approaches have shown their effectiveness in imaging inaccessible regions. Unfortunately, the problem at hand is strongly non-linear and ill-posed and therefore it is often solved by seeking for the global minimum of a proper functional. Nevertheless, it is also necessary to introduce suitable regularizations in order to improve the convergence of the reconstruction process toward a reliable solution. In this context, the paper presents a method that exploits an energetic constraint to define a regularization term of the cost functional. A numerical validation with single and multiple inhomogeneous lossless targets demonstrates that an improvement of the reconstruction accuracy is achievable without introducing significant computational complexity to the inverse scattering problem.

NUMERICAL INVESTIGATION OF AN ENERGETIC CONSTRAINT FOR INVERSE SCATTERING PROBLEMS

2010-05-06

PIER

Vol. 104, 31-48, 2010

doi:10.2528/PIER10041406

download: 305

FEM Analysis of Angular Misalignment Fault in SRM Magnetostatic Characteristics

Hossein Torkaman and Seyed Ebrahim Afjei

This paper proposes magnetostatic analysis of Switched Reluctance Motor (SRM) under angular misalignment fault to evaluate the performance of the motor under different operating conditions. In this analysis three-dimensional finite element method (FEM) is used to simulate reliable and precise model by considering the complex motor magnetic geometry, end effects, axial fringing effects as well as nonlinear properties of the magnetic materials. The FE analysis is performed to obtain the static magnetic characteristics of SRM including flux density, flux linkages, terminal inductance and mutual inductance profile under different rotor positions for different varying degree of faults. Consequently, it presents assessing the features of mutual inductance in inactive phases to study the variations of diagnosis index. The results obtained present useful information regarding the detection of fault and its direction as well as the amount of angular misalignment fault in the motor. To the best knowledge of the authors, such an analysis has not been carried out previously.

FEM ANALYSIS OF ANGULAR MISALIGNMENT FAULT IN SRM MAGNETOSTATIC CHARACTERISTICS

2010-05-05

PIER

Vol. 104, 15-30, 2010

doi:10.2528/PIER09121610

download: 341

Optimization of Stirrer with Various Parameters in Reverberation Chamber

Joo-Il Hong and Chang-Su Huh

Reverberation chambers are widely used in electromag-netic compatibility test facilities because they provide a large working volume and are cheaper than other types of test facilities. In addition, they provide a statistically uniform field and generate a high maximum electric field within a relatively large volume. The volume of the cavity, the structure of the stirrer, and high tested frequency must be used in the reverberation chamber appropriately. Changing a volume of cavity dimensions and test frequency can be difficult in the reverberation chamber because they were determined already in the design process. In these cases, the stirrer should be changed. We investigated of the effects of various stirrer angles and heights on a reverberation chamber. The optimization of the stirrer with respect to various stirrer parameters was investigated; these parameters are related to field uniformity, the quality factor, stirred efficiency, and electric field polarity. Our results suggest that a reverberation chamber can be successfully operated if careful decisions are made regarding the stirrer design.

OPTIMIZATION OF STIRRER WITH VARIOUS PARAMETERS IN REVERBERATION CHAMBER

2010-05-05

PIER

Vol. 104, 1-13, 2010

doi:10.2528/PIER10040507

download: 346

UWB Circular Slot Antenna Provided with an Inverted-L Notch Filter for the 5 GHz WLAN Band

Sebastiano Barbarino and Fabrizio Consoli

The study of a planar circular slot antenna for Ultrawideband (UWB) communications is presented. The integration on this antenna of a notch filter, to reduce the possible interferences with the 5 GHz WLAN communications, has been discussed in detail. Four different structures, achieved by etching a suitable pattern on the antenna circular stub, have been considered, and their features have been compared. The antenna with symmetrical and inverted-L cuts shows the best performance, and it has been therefore realized and fully characterized. It shows very good matching features over the UWB band, and notable rejection of the 5 GHz WLAN band.