volume | PIER Journals

Abstract

In order to solve the problems of low reliability, low integration, and high cost brought by mechanical sensors in the control system of permanent magnet-assisted bearingless synchronous reluctance motor (PMa-BSynRM), a displacement self-sensing method of the Bback propagation (BP) neural network left-inverse system under the optimization of an improved particle swarm algorithm is proposed. Firstly, the working principle of PMa-BSynRM is introduced, and the mathematical model of PMa-BSynRM is derived. Secondly, the suspension force model is established to prove the left reversibility of the PMa-BSynRM displacement subsystem on the basis of the observation principle of the left reversible system. Thirdly, the weights of BP neural network are optimized by using the improved particle swarm algorithm to avoid local optimum, and the final weights are obtained to complete the construction of the displacement self-detection control system. On this basis, velocity change and anti-interference simulations are conducted to prove the tracking performance of the displacement system. Finally, static suspension, velocity change, and anti-interference experiments are executed which verify the accuracy and feasibility of the proposed displacement self-detection system.

1. Xu, Meimei, Guohai Liu, Qian Chen, Jinghua Ji, and Wenxiang Zhao, "Design and optimization of a fault tolerant modular permanent magnet assisted synchronous reluctance motor with torque ripple minimization," IEEE Transactions on Industrial Electronics, Vol. 68, No. 9, 8519-8530, Sep. 2021.

2. Hua, Yizhou, Huangqiu Zhu, Min Gao, and Zongyou Ji, "Multiobjective optimization design of permanent magnet assisted bearingless synchronous reluctance motor using NSGA-Ⅱ," IEEE Transactions on Industrial Electronics, Vol. 68, No. 11, 10477-10487, Nov. 2021.

3. Sokolov, Maksim, Wolfgang Gruber, Seppo E. Saarakkala, and Marko Hinkkanen, "Modeling of a bearingless synchronous reluctance motor with combined windings," 2019 IEEE Energy Conversion Congress and Exposition (ECCE), 7084-7090, Baltimore, MD, USA, 2019.

4. Ji, Zongyou, Huangqiu Zhu, Ying Xu, and Mengyao Wu, "Optimization design of permanent magnet assisted single winding bearingless synchronous reluctance motor," IEEE Transactions on Applied Superconductivity, Vol. 30, No. 4, 1-5, Jun. 2020.

5. Saarakkala, Seppo E., Maksim Sokolov, Marko Hinkkanen, Jari Kataja, and Kari Tammi, "State-space flux-linkage control of bearingless synchronous reluctance motors," 2016 IEEE Energy Conversion Congress and Exposition (ECCE), 1-8, Milwaukee, WI, USA, Sep. 2016.

6. Gruber, Wolfgang and Siegfried Silber, "Dual field-oriented control of bearingless motors with combined winding system," 2018 International Power Electronics Conference (IPEC-Niigata 2018-ECCE Asia), 4028-4033, Niigata, Japan, May 2018.

7. Kong, Xianzuo and Lin Wang, "An adaptive parameter decoupling control method for bearingless synchronous reluctance motor," Proceeding of the 11th World Congress on Intelligent Control and Automation, 4572-4576, Shenyang, China, Jun. 2014.

8. Feng, Dongmei, Lidong Zhu, Xiaoyan Diao, and Huangqiu Zhu, "Decoupling control of bearingless synchronous reluctance motor based on support vector machines inverse system," Proceedings of the 32nd Chinese Control Conference, 547-551, Xi'an, China, 2013.

9. Wang, Yi, Li Cao, Dongmei Feng, Xiaoyan Diao, and Huangqiu Zhu, "Decoupling control based on neural network inverse for bearingless synchronous reluctance motor," Proceedings of the 31st Chinese Control Conference, 3291-3295, Hefei, China, Jul. 2012.

10. Zhang, Yi, Yu Wang, Cheng-Gao Zhang, and Wen-Juan Hao, "General analysis of combinations of high frequency injected auxiliary coils in displacement sensorless control," 2021 IEEE 4th Student Conference on Electric Machines and Systems (SCEMS), 1-7, Huzhou, China, 2021.

11. Nian, Heng, Yu Quan, and Jiawen Li, "Rotor displacement sensorless control strategy for PM type bearingless motor based on the parameter identification," 2009 International Conference on Electrical Machines and Systems, 1-5, Tokyo, Japan, 2009.

12. Tang, Qipeng, Anwen Shen, Xin Luo, and Jinbang Xu, "PMSM sensorless control by injecting HF pulsating carrier signal into ABC frame," IEEE Transactions on Power Electronics, Vol. 32, No. 5, 3767-3776, May 2017.

13. Tan, Chao, Honghua Wang, and Yi Wang, "Rotor eccentricity compensation of bearingless switched reluctance motors based on extended kalman filter," 2019 12th International Symposium on Computational Intelligence and Design (ISCID), 111-115, Hangzhou, China, Dec. 2019.

14. Sun, Jingbo and Huangqiu Zhu, "Self-sensing technology of rotor displacement for six-pole radial active magnetic bearing using improved quantum particle swarm optimized cubature Kalman filter," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 10, No. 3, 2881-2889, Jun. 2022.

15. Tera, Takahiro, Yoshikazu Yamauchi, Akira Chiba, Tadashi Fukao, and M. Azizur Rahman, "Performances of bearingless and sensorless induction motor drive based on mutual inductances and rotor displacements estimation," IEEE Transactions on Industrial Electronics, Vol. 53, No. 1, 187-194, Feb. 2006.

16. Nian, Heng, Yi-Kang He, Lei Huang, and Huajun Ying, "Sensorless operation of an inset PM bearingless motor implemented by the combination approach of MRAS and HF signal injection," 2006 6th World Congress on Intelligent Control and Automation, Vol. 2, 8163-8167, Dalian, 2006.

17. Zhu, Huangqiu and Yijian Shi, "Displacement self-sensing control of permanent magnet assisted bearingless synchronous reluctance motor based on least square support vector machine optimized by improved NSGA-II," IEEE Transactions on Industrial Electronics, Vol. 71, No. 2, 1201-1211, Feb. 2024.

Mr. Jing Wang

Dr. Gai Liu

Prof. Huangqiu Zhu