volume | PIER Journals

Abstract

This paper presents the design and investigation of array antennas formed of two narrow rectangular slots. Two approaches for feeding the two slots by microstrip lines are investigated as well as the influence of changing the distance between the slots on the radiation pattern. The two slots are etched on one side of the substrate, while the feed network is placed on the other side. Two designs, depending on the feeding approach, are presented. In the first design, a simple T-shaped divider is used to feed the two slots, while the second design is based on a single microstrip line which feeds the two slots in series. Two antennas are for the first design, each with dimensions of 57.83 х 41.3 mm², while those of the second design have dimensions of 83.45 x 36.9 mm². The four proposed designs have been simulated and optimized using Computer Simulation Technology (CST-MWS) simulation program. Prototypes were fabricated and tested to verify the designs. The four antennas achieved -10 dB impedance bandwidths between 8.6% and 9.4%, while the gain values were between 4.7 dB and 5.7 dB. The comparisons between the fabricated and simulated antennas considered the reflection coefficient and radiation pattern showing good agreement.

1. Li, R.-L., B. Pan, A. N. Traille, J. Papapolymerou, J. Laskar, and M. M. Tentzeris, "Development of a cavity-backed broadband circularly polarized slot/strip loop antenna with a simple feeding structure," IEEE Transactions on Antennas and Propagation, Vol. 56, No. 2, 312-318, Feb. 2008.
doi:10.1109/TAP.2007.915412

2. Xu, J. F., W. Hong, P. Chen, and K. Wu, "Design and implementation of low sidelobe substrate integrated waveguide longitudinal slot array antennas," IET Microwaves, Antennas & Propagation, Vol. 3, No. 5, 790-797, 2009.
doi:10.1049/iet-map.2008.0157

3. Garg, R., P. Bhartia, I. Bahl, and A. Ittipiboon, Microstrip Antenna Design Handbook, Artech House, 2001.

4. Sze, J.-Y. and K.-L. Wong, "Bandwidth enhancement of a microstrip line-fed printed wide-slot antenna," IEEE Transactions on Antennas and Propagation, Vol. 49, 1020-1024, Jul. 2001.

5. Sharma, S. K., N. Jacob, and L. Shafai, "Low profile wide band slot antenna for wireless communications," IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313), Vol. 1, 390-393, San Antonio, TX, USA, 2002.

6. Ko, S. C. K. and R. D. Murch, "A diversity antenna for external mounting on wireless handsets," IEEE Transactions on Antennas and Propagation, Vol. 49, No. 5, 840-–842, May 2001.
doi:10.1109/8.929639

7. Nesic, A., "Slotted antenna array excited by a coplanar waveguide," Electronics Letters, Vol. 18, No. 6, 275-276, Mar. 18, 1982.
doi:10.1049/el:19820188

8. Sharma, S. K., L. Shafai, and N. Jacob, "Investigations of wideband microstrip slot antenna," IEEE Transactions on Antennas and Propagation, Vol. 52, No. 3, 865-872, Mar. 2004.
doi:10.1109/TAP.2004.825191

9. Latif, S. I., L. Shafai, and S. K. Sharma, "Bandwidth enhancement and size reduction of microstrip slot antennas," IEEE Transactions on Antennas and Propagation, Vol. 53, No. 3, 994-1003, Mar. 2005.
doi:10.1109/TAP.2004.842674

10. Gad, N. H. and M. Vidmar, "Design of a microstrip-fed printed-slot antenna using defected ground structures for multiband applications," ACES Journal, Vol. 33, No. 8, 854-860, Aug. 2018.

11. Zhong, J., R. M. Edwards, L. Ma, and X.-W. Sun, "Multiband slot antennas for metal back cover mobile handsets," Progress In Electromagnetics Research Letters, Vol. 39, 115-126, 2013.
doi:10.2528/PIERL13021901

12. Al-Nuaimi, M. K. T. and W. G. Whittow, "On the miniaturization of microstrip line-fed slot antenna using various slots," IEEE Loughborough Antennas & Propagation Conference (LAPC), Loughborough, UK, 2011.

13. Sim, C.-Y.-D., Y.-W. Hsu, and C.-H. Chao, "Dual broadband slot antenna design for WLAN applications," Microwave and Optical Technology Letters, Vol. 56, No. 4, 983-988, Apr. 2014.
doi:10.1002/mop.28207

14. Rao, Q., T. A. Denidni, and R. H. Johnston, "A single-substrate microstrip-fed slot antenna array with reduced back radiation," IEEE Antennas and Wireless Propagation Letters, Vol. 3, 265-268, 2004.

15. Henderson, K. Q., S. I. Latif, G. Lazarou, S. K. Sharma, A. Tabbal, and S. Saial, "Dual-stub loaded microstrip line-fed multi-slot printed antenna for L TE bands," 2018 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, 1743-1744, Boston, MA, 2018.

16. Ikram, M., E. A. Abbas, N. Nguyen-Trong, K. H. Sayidmarie, and A. Abbosh, "Integrated frequency-reconfigurable slot antenna and connected slot antenna array for 4G and 5G mobile handsets," IEEE Transactions on Antennas and Propagation, Vol. 67, No. 12, 7225-7233, Dec. 2019.
doi:10.1109/TAP.2019.2930119

17. Ikram, M., N. Nguyen-Trong, and A. Abbosh, "Hybrid antenna using open-ended slot for integrated 4G/5G mobile application," IEEE Antennas and Wireless Propagation Letters, Vol. 19, No. 4, 710-714, Apr. 2020.
doi:10.1109/LAWP.2020.2978181

18. Younus, K. M. and K. H. Sayidmarie, "A tri-band frequency reconfigurable slot antenna for wireless applications," ACES Journal — Applied Computational Electromagnetics Society, Vol. 35, No. 2, 194-200, 2020.

19. Zhong, J., R. M. Edwards, L. Ma, and X. Sun, "Multiband slot antennas for metal back cover mobile handsets," Progress In Electromagnetics Research Letters, Vol. 39, 115-126, 2013.
doi:10.2528/PIERL13021901

20. Balanis, C. A., Antenna Theory: Analysis and Design, Chapter 14, 4th Edition, Wiley, 2016.

Prof. Khalil Sayidmarie

Mr. Karam Mudhafar Younus