volume | PIER Journals

Abstract

In this paper, a novel branch line coupler with improved bandwidth and reduced size is presented. The size reduction is achieved by means of capacitive loading. The capacitive loaded transmission line implemented in the proposed design eliminates the need of open stubs. The mechanism of size reduction and bandwidth enhancement of the coupler is discussed analytically with the help of its equivalent circuit. A prototype is fabricated and tested to validate the concept. The measured fractional bandwidth is 40%, ranging from 2.8 GHz to 4.2 GHz which is suitable for 5G systems. Moreover, the obtained phase imbalance between the output ports is less than ±5° for the entire operating range.

1. Pozar, D. M. P., Microwave Engineering, 3rd Ed., Wiley, New York, NY, USA, 2005.

2. Kawai, T. and I. Ohta, "Planar-circuit-type 3-dB quadrature hybrids," IEEE Trans. Microw. Theory Tech., Vol. 42, No. 12, 2462-2467, 1994.
doi:10.1109/22.339782

3. Ghali, H. and T. Moselhy, "Design of fractal rat-race coupler," IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No. 04CH37535), Vol. 1, 323-326, Fort Worth, TX, USA, 2004.

4. Wang, J., B. Z. Wang, Y. X. Guo, L. C. Ong, and S. Xiao, "A compact slow-wave microstrip branch-line coupler with high performance," IEEE Microw. Wirel. Components Lett., Vol. 17, No. 7, 501-503, 2007.
doi:10.1109/LMWC.2007.899307

5. Eccleston, K. W. and S. H. M. Ong, "Compact planar microstripline branch-line and rat-race couplers," IEEE Trans. Microw. Theory Tech., Vol. 51, No. 10, 2119-2125, 2003.
doi:10.1109/TMTT.2003.817442

6. Chun, Y. and J. Hong, "Compact wide-band branch-line hybrids," IEEE Trans. Microw. Theory Tech., Vol. 54, No. 2, 704-709, Feb. 2006.
doi:10.1109/TMTT.2005.862657

7. Wang, Y., M. Ke, M. J. Lancaster, and F. Huang, "Micromachined millimeter-wave rectangular-coaxial branch-line coupler with enhanced bandwidth," IEEE Trans. Microw. Theory Tech., Vol. 57, No. 7, 1655-1660, 2009.
doi:10.1109/TMTT.2009.2021872

8. Lee, S. and Y. Lee, "Wideband branch-line couplers with single-section quarter-wave transformers for arbitrary coupling levels," IEEE Microw. Wirel. Components Lett., Vol. 22, No. 1, 19-21, 2012.
doi:10.1109/LMWC.2011.2176723

9. Wu, Y., Q. Liu, S. W. Leung, Y. Liu, and Q. Xue, "A novel planar impedance-transforming tight-coupling coupler and its applications to microstrip baluns," IEEE Trans. Components, Packag. Manuf. Technol., Vol. 4, No. 9, 1480-1488, 2014.
doi:10.1109/TCPMT.2014.2339232

10. Koziel, S. and P. Kurgan, "Design of high-performance hybrid branch-line couplers for wideband and space-limited applications," IET Microwaves, Antennas Propag., Vol. 10, No. 12, 1339-1344, 2016.
doi:10.1049/iet-map.2016.0188

11. Kumar, K. V. P. and S. S. Karthikeyan, "Miniaturized quadrature hybrid coupler using modified T-shaped transmission line for widerange harmonic suppression," IET Microwaves, Antennas Propag., Vol. 10, No. 14, 1522-1527, 2016.
doi:10.1049/iet-map.2016.0301

12. Wang, C. and W. Tang, "Compact branch-line coupler with harmonic suppression based on a planar simplified dual composite right/left-handed transmission line structure," Progress In Electromagnetics Research M, Vol. 69, 127-138, 2018.
doi:10.2528/PIERM18022706

13. Geng, L., G.-M. Wang, B.-F. Zong, M.-K. Hu, and H.-Y. Zeng, "Miniaturized branch-line coupler with wide upper stopband using right-angled triangle artificial transmission line," Progress In Electromagnetics Research Letters, Vol. 88, 137-142, 2020.
doi:10.2528/PIERL19101802

14. Chan, K. L., P. A. Alhargan, and S. R. Judah, "A quadrature-hybrid design using a four-port elliptic patch," IEEE Trans. Microw. Theory Tech., Vol. 45, No. 2, 307-310, 1997.
doi:10.1109/22.557619

15. Zheng, S. Y., J. H. Deng, Y. M. Pan, and W. S. Chan, "Circular sector patch hybrid coupler with an arbitrary coupling coefficient and phase difference," IEEE Trans. Microw. Theory Tech., Vol. 61, No. 5, 1781-1792, 2013.
doi:10.1109/TMTT.2013.2252184

16. Bekasiewicz, A. and S. Koziel, "Novel structure and design of enhanced-bandwidth hybrid quadrature patch coupler," Microw. Opt. Technol. Lett., Vol. 60, No. 12, 3073-3076, 2018.
doi:10.1002/mop.31426

17. Zou, X., C. M. Tong, C. Z. Li, and W. J. Pang, "Wideband hybrid ring coupler based on half-mode substrate integrated waveguide," IEEE Microw. Wirel. Components Lett., Vol. 24, No. 9, 596-598, 2014.
doi:10.1109/LMWC.2014.2328899

18. Shams, S. I. and A. A. Kishk, "Design of 3-dB hybrid coupler based on RGW technology," IEEE Trans. Microw. Theory Tech., Vol. 65, No. 10, 3849-3855, 2017.
doi:10.1109/TMTT.2017.2690298

19. Merello, J. M., V. Nova, C. Bachiller, J. R. Sanchez, A. Belenguer, and V. E. B. Esbert, "Miniaturization of power divider and 90^◦ hybrid directional coupler for C-band applications using empty substrate-integrated coaxial lines," IEEE Trans. Microw. Theory Tech., Vol. 66, No. 6, 3055-3062, 2018.
doi:10.1109/TMTT.2018.2828089

20. Wang, Y., A. M. Abbosh, and B. Henin, "Broadband microwave crossover using combination of ring resonator and circular microstrip patch," IEEE Trans. Components, Packag. Manuf. Technol., Vol. 3, No. 10, 1771-1777, 2013.
doi:10.1109/TCPMT.2013.2262110

21. Liu, S. and F. Xu, "Minimized multi-layer substrate integrated waveguide 3-dB small aperture coupler," Microw. Opt. Technol. Lett., Vol. 59, 3201-3205, 2017.
doi:10.1002/mop.30892

22. Manoochehri, O., A. Darvazehban, and D. Erricolo, "UWB double-ridge waveguide coupler with low loss," Microw. Opt. Technol. Lett., Vol. 59, 1787-1791, 2017.
doi:10.1002/mop.30686

Dr. Muquaddar Ali

Professor Kamalesh Kumar Sharma

Dr. Rajendra Prasad Yadav