volume | PIER Journals

2018-04-09

Routing with Classical Corrugated Waveguide Low-Pass Filters with Embedded Bends

Fernando Teberio,

Dr. Fernando Teberio

Electrical and Electronic Engineering Department

Public University of Navarre

Spain

Homepage

Jon Mikel Percaz,

Dr. Jon Mikel Percaz

Electrical and Electronic Engineering Department

Public University of Navarre

Spain

Homepage

Ivan Arregui,

Dr. Ivan Arregui

Department of Electrical, Electronic and Communications Engineering, Institute of Smart Cities (ISC)

Public University of Navarre (UPNA), Campus Arrosadia

Spain

Homepage

Petronilo Martin-Iglesias,

Dr. Petronilo Martin-Iglesias

European Space Research and Technology Centre, European Space Agency (ESTEC-ESA)

The Netherlands

Homepage

Txema Lopetegi,

Prof. Txema Lopetegi

Departamento de Ingenieria Electrica y Electronica

Universidad Publica de Navarra

Spain

Homepage

Miguel Laso,

Dr. Miguel Laso

Department of Electrical, Electronic and Communications Engineering, Institute of Smart Cities (ISC)

Public University of Navarre (UPNA), Campus Arrosadia

Spain

Homepage

Israel Arnedo

Dr. Israel Arnedo

Department of Electrical, Electronic and Communications Engineering, Institute of Smart Cities (ISC)

Public University of Navarre (UPNA), Campus Arrosadia

Spain

Homepage

Progress In Electromagnetics Research Letters, Vol. 75, 1-6, 2018

doi:10.2528/PIERL18022204

Abstract

A very simple design method to embed routing capabilities in classical corrugated filters is presented in this paper. The method is based on the calculation of the heights and lengths of the so-called filters design building blocks, by means of a consecutive and separate extraction of their local reflection coefficients along the device. The proposed technique is proved with a 17th-order Zolotarev-filter whose topology is bent twice so that the input and output ports are in the same plane while preserving the in-line filters behaviour. This new filter allows the possibility of eliminating subsequent bending structures, reducing the insertion loss, weight, and PIM.

Citation

Copy Export

Fernando Teberio, Jon Mikel Percaz, Ivan Arregui, Petronilo Martin-Iglesias, Txema Lopetegi, Miguel Laso, and Israel Arnedo, "Routing with Classical Corrugated Waveguide Low-Pass Filters with Embedded Bends," Progress In Electromagnetics Research Letters, Vol. 75, 1-6, 2018.
doi:10.2528/PIERL18022204

References

1. Moheb, H., et al. "Design & development of co-polarized Ku-band ground terminal system for very small aperture terminal (VSAT) application," IEEE APS-S, Vol. 3, 2158-2161, 1999.

2. Avramis, E., et al. Cross-polar and Co-polar Transceiver, U.S. Patent 7474173 B2, Jun. 27, 2006.

3. Laidig, D., et al. Integrated Waveguide Transceiver, U.S. Patent 8433257 B2, Apr. 30, 2013.

4. Wolf, H., et al. "Satellite multi-beam antennas at airbus defense and space: State of the art and trends," Proc. EuCAP, 182-185, 2014.

5. Wang, J., et al. "A wideband waveguide diplexer for the extend c-band antenna systems," Progress In Electromagnetics Research C, Vol. 69, 73-82, 2016.
doi:10.2528/PIERC16083104

6. Cameron, R., et al. Microwave Filters for Communication Systems: Fundamentals, Design and Applications, John Wiley & Sons, 2007.

7. Teberio, F., et al. "Accurate design of corrugated waveguide low-pass filters using exclusively closed form expressions," Proc. Eur. Microw. Conf., 182-185, 2017.

8. Morini, A., et al. "Curved filters in rectangular waveguide," Proc. Eur. Microw. Conf., 182-185, 1996.

9. Carceller, C., et al. "Design of hybrid folded rectangular waveguide filters with transmission zeros below the passband," IEEE Trans. Microw. Theory Tech., Vol. 64, No. 2, 475-485, 2016.

10. Levy, R., "Inhomogeneous stepped-impedance corrugated waveguide low-pass filters," IEEE MTT-S Digest, 2005.