volume | PIER Journals

2009-05-15

Protection of Car-Size Sensitive Equipments Using a Shielding Cover

Mohammad Danaei,

Dr. Mohammad Danaei

Department of Electrical Engineering

University of Imam Hossein

Iran

Homepage

Hadi Aliakbarian,

Dr. Hadi Aliakbarian

Electrical Engineering

K.N.Toosi Univ. of Tech.

Iran

Homepage

Morteza Azarbadegan,

Dr. Morteza Azarbadegan

Facluty of ECE

Iranian University of Science & Technology

Iran

Homepage

Yahya Bairami

Dr. Yahya Bairami

Facluty of ECE.

Iranian University of Science & Technology

Iran

Homepage

Progress In Electromagnetics Research M, Vol. 7, 97-108, 2009

doi:10.2528/PIERM09031910

Abstract

In this paper, the protection of a sensitive car-size system using a hemispherical shielding cover is discussed. The shield cover spreads on the soil, inserting some vertical (metal) rods into the ground, and adding a gridded wire carpet under the cover structure. The shielding performance of the cover structure was considered by a numerical simulation and experiments. The proposed cover structure shows the shielding effectiveness (SE) of -40 dB in worst case in the frequency range of 10 to 200 MHz.

Citation

Copy Export

Mohammad Danaei, Hadi Aliakbarian, Morteza Azarbadegan, and Yahya Bairami, "Protection of Car-Size Sensitive Equipments Using a Shielding Cover," Progress In Electromagnetics Research M, Vol. 7, 97-108, 2009.
doi:10.2528/PIERM09031910

References

1. Herlemann, H., et al. "Shielding of electronic systems against transient electromagnetic interferences," Advances in Radio Science, Vol. 3, 131-135, 2005.

2. Danaei, M. M., et al. "How to protect of car-size sensitive equipments using a shielding cover," 19th International Zurich Symposium on Electromagnetic Compatibility, 823-826, Singapore, May 19-23, 2008.

3. Bahadorzadeh, M. and M. N. Moghaddasi, "Improving the shielding effectiveness of a rectangular metallic enclosure with aperture by using extra shielding wall," Progress In Electromagnetics Research Letters, Vol. 1, 45-50, 2008.
doi:10.2528/PIERL07110706

4. Fisher, S. C., R. R. Stewart, and H. M. Jolt, "Processing ground penetrating radar (GPR) data," CREWES Research Report, Vol. 4, 1992.

5. Lei, J. Z., C. H. Liang, and Y. Zhang, "Study on shielding effectiveness of metallic cavities with apertures by combining parallel FDTD method with windowing technique," Progress in Electromagnetics Research, Vol. 74, 85-112, 2007.
doi:10.2528/PIER07041905

6. Wire Cloth/Wire Mesh Products, 16 × 16 Mesh, 0.011, Screen Technology Group, Inc., Washougal, U.S.A..

7. Dehkhoda, P., A. Tavakoli, and R. Moini, "Fast calculation of the shielding effectiveness for a rectangular enclosure of finite wall thickness and with numerous small aperture," Progress In Electromagnetics Research, Vol. 86, 341-355, 2008.
doi:10.2528/PIER08100803

8. Kaiser, K. L., Electromagnetic Shielding, CRC Press, 2006.