volume | PIER Journals

2018-04-11

Compact Microstrip UWB Power Divider with Dual Notched Bands Using Dual-Mode Resonator

Lihua Wu,

Dr. Lihua Wu

School of Intelligent Robot

Open University of Guangdong

China

Homepage

Shanqing Wang,

Dr. Shanqing Wang

School of Biomedical Engineering

Sun Yat-sen University

China

Homepage

Luetao Li,

Dr. Luetao Li

School of Information and Communication Engineering

Beijing University of Posts and Telecommunications

China

Homepage

Chengpei Tang

Dr. Chengpei Tang

School of Engineering

Sun Yat-sen University

China

Homepage

Progress In Electromagnetics Research Letters, Vol. 75, 39-45, 2018

doi:10.2528/PIERL18010942

Abstract

In this paper, a novel ultra-wideband (UWB) power divider with dual notched bands using square ring multiple-mode resonators (SRMMRs) is presented. The characteristics of the proposed SRMMRs are investigated by using even- and odd-mode analysis. Then, the initial UWB performance is achieved by introducing SRMMRs to the basic Wilkinson power divider. Finally, two desired notched bands inside the UWB passband are achieved by embedding a pair of coupled dual-mode stepped impedance resonators (DMSIRs) into the SRMMRs. The central frequencies of the notched bands can be easily controlled by the electrical length of the DMSIRs. To validate the design concept, a novel compact UWB power divider with dual notched bands centered at frequencies of 5.8 GHz and 8.0 GHz is designed and measured. The simulated and measured results indicate that it has a low insertion loss and good return loss performance at all the three ports, and a high isolation between the two output ports across the UWB bandwidth from 3.1 to 10.6 GHz with a small size of 0.46λ_g×0.69λ_g, where λ_g is the guided wavelength at 6.85 GHz.

Citation

Copy Export

Lihua Wu, Shanqing Wang, Luetao Li, and Chengpei Tang, "Compact Microstrip UWB Power Divider with Dual Notched Bands Using Dual-Mode Resonator," Progress In Electromagnetics Research Letters, Vol. 75, 39-45, 2018.
doi:10.2528/PIERL18010942

References

1. Zhao, J. D., J. P. Wang, and J. L. Lin, "Compact UWB bandpass filter with triple notched bands using parallel U-shaped defected microstrip structure," IET Electron. Lett., Vol. 50, No. 2, 89-91, 2014.
doi:10.1049/el.2013.3077

2. Wei, F., X. Wang, X. Zou, and X. Shi, "UWB filtering power divider with two narrow notch-bands and wide stop-band," Frequenz., Vol. 72, No. 1-2, 2017.
doi:10.1515/freq-2017-0031

3. Lee, S. W., C. S. Kim, K. S. Choi, J. S. Park, and D. Ahn, "A general design formula of multi-section power divider based on singly terminated filter design theory," IEEE MTTS-S Int. Microwave Symp. Dig., Vol. 2, 1297-1300, Phoenix, AZ, USA, 2001.

4. Xue, Q. and K. Song, "Ultra-wideband coaxial-waveguide power divider with flat group delay response," IET Electron. Lett., Vol. 46, No. 17, 1236-1237, 2010.
doi:10.1049/el.2010.1295

5. Wong, S. W. and L. Zhu, "Ultra-wideband power divider with good in-band splitting and isolation performances," IEEE Microw. Wirel. Compon. Lett., Vol. 18, No. 8, 518-520, 2008.
doi:10.1109/LMWC.2008.2001009

6. Song, K.-J. and Q. Xue, "Novel ultra-wideband (UWB) multilayer slotline power divider with bandpass response," IEEE Microw. Wirel Compon. Lett., Vol. 20, No. 1, 13-15, 2010.
doi:10.1109/LMWC.2009.2035951

7. Wang, J., W. Hong, H. J. Tang, Y. Zhang, J.-X. Chen, and J.-Y. Zhou, "Ultra-wideband bandpass filter with multiple frequency notched bands based on SIW and SIR technology," Proceedings of the 36th European Microwave Conference, 268-271, 2009.

8. Abbosh, A. M., "Multilayer bandstop filter for ultra wideband systems," IET Microw. Antennas Propag., Vol. 3, No. 1, 130-136, 2009.
doi:10.1049/iet-map:20070294

9. Matthaei, G., L. Young, and E. Jones, Microwave Filters, Impedance-matching Network, and Coupling Structures, 219-220, Artech House, Norwood, MA, USA, 1980.

10. Pozar, D. M., Microwave Engineering, 3th Ed., 185-187, Wiley, New York, 2005.