Vol. 123

Front:[PDF file] Back:[PDF file]
Latest Volume
All Volumes
All Issues
2011-12-20

Experimental Comparison of Remedial Single-Channel Operations for Redundant Flux-Switching Permanent-Magnet Motor Drive

By Wenxiang Zhao, Ming Cheng, Ruiwu Cao, and Jinghua Ji
Progress In Electromagnetics Research, Vol. 123, 189-204, 2012
doi:10.2528/PIER11110405

Abstract

Redundant flux-switching permanent-magnet (R-FSPM) motor is a new fault-tolerant machine having PMs in the stator, offering high efficiency, high reliability, and robust structure. This paper proposes two remedial control strategies for fault-tolerant operations of the R-FSPM motor drive in the single-channel (SC) mode. First, by doubling the healthy-channel currents, the reduced torque due to one channel loss can be remedied, the so-called remedial brushless AC (BLAC) operation mode. Second, by injecting harmonic current (IHC) considering harmonic back-EMF effect, the reduced torque can also be smoothly remedied, the so-called remedial IHC operation mode. Finally, both of the proposed remedial control strategies are verified by co-simulation and experimentation, hence confirming the validity of the proposed fault-tolerant R-FSPM motor drive.

Citation


Wenxiang Zhao, Ming Cheng, Ruiwu Cao, and Jinghua Ji, "Experimental Comparison of Remedial Single-Channel Operations for Redundant Flux-Switching Permanent-Magnet Motor Drive," Progress In Electromagnetics Research, Vol. 123, 189-204, 2012.
doi:10.2528/PIER11110405
http://jpier.org/PIER/pier.php?paper=11110405

References


    1. Liu, C., K. T. Chau, and J. Z. Jiang, "A permanent-magnet hybrid brushless integrated starter-generator for hybrid electric vehicles," IEEE Transactions on Industrial Electronics, Vol. 57, No. 12, 4055-4064, 2010.
    doi:10.1109/TIE.2010.2044128

    2. El-Refaie, A. M., "Fault-tolerant permanent magnet machines: A review," IET Electric Power Applications, Vol. 5, No. 1, 59-74, 2011.
    doi:10.1049/iet-epa.2009.0117

    3. Chau, K. T., C. C. Chan, and C. Liu, "Overview of permanent-magnet brushless drives for electric and hybrid electric vehicles," IEEE Transactions on Industrial Electronics, Vol. 55, No. 6, 2246-2257, 2008.
    doi:10.1109/TIE.2008.918403

    4. Touati, S., R. Ibtiouen, O. Touhami, and A. Djerdir, "Experimental investigation and optimization of permanent magnet motor based on coupling boundary element method with permeances network," Progress In Electromagnetics Research, Vol. 111, 71-90, 2011.
    doi:10.2528/PIER10092303

    5. Jian, L., G. Xu, J. Song, H. Xue, D. Zhao, and J. Liang, "Optimum design for improving modulating-effect of coaxial magnetic gear using response surface methodology and genetic algorithm," Progress In Electromagnetics Research, Vol. 116, 297-312, 2011.

    6. Jack, A. G., B. C. Mecrow, and J. Haylock, "A comparative study of permanent magnet and switched reluctance motors for high-performance fault-tolerant applications," IEEE Transactions on Industry Applications, Vol. 32, No. 4, 889-895, 1996.
    doi:10.1109/28.511646

    7. Sun, Z., J. Wang, G. Jewell, and D. Howe, "Enhanced optimal torque control of fault-tolerant permanent magnet machines under flux weakening operations," IEEE Transactions on Industrial Electronics, Vol. 57, No. 1, 344-353, 2010.
    doi:10.1109/TIE.2009.2038336

    8. Parsa, L. and H. A. Toliyat, "Fault-tolerant interior-permanent-magnet machines for hybrid electric vehicle applications," IEEE Transactions on Vehicular Technology, Vol. 56, No. 4, 1546-1552, 2007.
    doi:10.1109/TVT.2007.896978

    9. Dwari, S. and L. Parsa, "Fault-tolerant control of five-phase permanent magnet motors with trapezoidal back-EMF," IEEE Transactions on Industrial Electronics, Vol. 58, No. 2, 476-485, 2011.
    doi:10.1109/TIE.2010.2045322

    10. Thomas, A. S., Z. Q. Zhu, and G. W. Jewell, "Comparison of flux switching and surface mounted permanent magnet generators for high-speed applications," IET Electrical Systems in Transportation, Vol. 1, No. 3, 111-116, 2011.
    doi:10.1049/iet-est.2010.0049

    11. Cheng , M., W. Hua, J. Zhang, and W. Zhao, "Overview of stator-permanent magnet brushless machines," IEEE Transactions on Industrial Electronics, Vol. 58, No. 11, 5087-5101, 2011.
    doi:10.1109/TIE.2011.2123853

    12. Zhao, W., K. T. Chau, M. Cheng, J. Ji, and X. Zhu, "Remedial brushless AC operation of fault-tolerant doubly-salient permanent-magnet motor drives," IEEE Transactions on Industrial Electronics, Vol. 57, No. 6, 2134-2141, 2010.
    doi:10.1109/TIE.2009.2033824

    13. Zhang, J., M. Cheng, Z. Chen, and W. Hua, "Comparison of stator-mounted permanent-magnet machines based on a general power equation," IEEE Transactions on Energy Conversion, Vol. 24, No. 4, 826-834, 2009.
    doi:10.1109/TEC.2009.2025346

    14. Zhu, Z. Q. and J. T. Chen, "Advanced flux-switching permanent magnet brushless machines," IEEE Transactions on Magnetics, Vol. 46, No. 6, 1447-1453, 2010.
    doi:10.1109/TMAG.2010.2044481

    15. Fei, W., P. C. K. Luk, J. Shen, B. Xia, and Y. Wang, "Permanent-magnet flux-switching integrated starter generator with different rotor configurations for cogging torque and torque ripple mitigations," Transactions on Industry Applications, Vol. 47, No. 3, 1247-1256, 2011.
    doi:10.1109/TIA.2011.2125750

    16. Zhao, W., M. Cheng, W. Hua, H. Jia, and R. Cao, "Back-EMF harmonic analysis and fault-tolerant control of flux-switching permanent-magnet machine with redundancy," IEEE Transactions on Industrial Electronics, Vol. 58, No. 5, 1926-1936, 2011.
    doi:10.1109/TIE.2010.2050758

    17. Jian, L. and K. T. Chau, "Design and analysis of a magnetic-geared electronic-continuously variable transmission system using finite element method," Progress In Electromagnetics Research, Vol. 107, 47-61, 2010.
    doi:10.2528/PIER10062806

    18. Jian, L., G. Xu, G. Yu, J. Song, J. Liang, and M. Chang, "Electro-magnetic design and analysis of a novel magnetic-gear-integrated wind power generator using time-stepping finite element method," Progress In Electromagnetics Research, Vol. 113, 351-367, 2011.

    19. Mahmoudi, A., N. A. Rahim, and H. W. Ping, "Axial-flux permanent-magnet motor design for electric vehicle direct drive using sizing equation and finite element analysis," Progress In Electromagnetics Research, Vol. 122, 467-496, 2012.
    doi:10.2528/PIER11090402

    20. Vaseghi, B., N. Takorabet, and F. Meibody-Tabar, "Transient finite element analysis of induction machines with stator winding turn fault," Progress In Electromagnetics Research, Vol. 95, 1-18, 2009.
    doi:10.2528/PIER09052004

    21. Torkaman, H. and E. Afjei, "FEM analysis of angular misalignment fault in SRM magnetostatic characteristics," Progress In Electromagnetics Research, Vol. 104, 31-48, 2010.
    doi:10.2528/PIER10041406

    22. Torkaman, H. and E. Afjei, "Hybrid method of obtaining degrees of freedom for radial airgap length in SRM under normal and faulty conditions based on magnetiostatic model," Progress In Electromagnetics Research, Vol. 100, 37-54, 2010.
    doi:10.2528/PIER09111108

    23. Ding, W., D. Liang, and H. Sui, "Dynamic modeling and performance prediction for dual-channel switched reluctance machine considering mutual coupling," IEEE Transactions on Magnetics, Vol. 46, No. 9, 3652-3663, 2010.
    doi:10.1109/TMAG.2010.2045390